**供應滾動計算器|布匹長度計算器|日本市場專用的日本款Z96-F型計米器
nbsp;用來計量布匹的長度的生產布匹，紡織品，印染，皮革和紙張的工廠都要用到計米器，他們都會用的專門用于產品長度丈量的計數器專門用于產品長度丈量的計數器
只要放在緩緩出來的產品上面，保證計數器不會前后左右移動，上下移動自由，沒有關系，只要產品移動，計數器馬上就開始記錄長度 只要記錄產品長度，都要用的，當然是比較長的產成品，包括電纜什么的
甚至鋼鐵廠生產卷板也用這
拿一塊長型鐵片，一端固定在計數器底板上，另一端固定在機器邊任何地方，只要放下來能放在產品上，用計數器自身重量壓住被測產品，即可
產品型號:Z96-F
Z96-F型滾動式計數器是根據用戶需要設計而成，是用于測量長度和各種機械傳動的記錄器，適用于紡織、印染、塑料薄膜、人造皮革等放量長度的記錄。
本器為五位數，轉軸旋轉方向可順、逆轉轉，順轉為遞加、逆轉為遞減，*高計錄數為：1-99999。當計數器**位數字顯示1時，記錄長度為1M，滾動輪轉3圈，依次類推，逢十進位。傳動比為：1：3，*高計數速度為200轉/分。
本器裝有復零機構，如記錄到一定數量后，可按下復零按鈕，數字全部復零，然后作**階段計數，使用極為方便。
本器跳號靈活，計數正確，號碼顯示清晰，工作環境溫度在-20度-+60度，仍能保持正常計數。
Meter Counter Z96-F
Owner’s Manual
Features
These counters are best suited for recording length of textiles, cables , paper and leathers, etc. They are usually set with machines for use.. Their lightweight design eases to be set on the machine and reduce costs. They are capable of counting to 10,000 meters or 10,000 yards depending on the model chosen. The large bright counter enhances visibility. They are widely used for manufacturers of long length materials or products.
Specifications
Figures 5 figures, 6.5mm
Wheel Size Diameter of 106.1mm(M Type)
Diameter of 97mm (Yd. Type)
Weight 0.5kg
Reset Knob
Capacity 0-9999 m ( Type M)
0-9999Yd (Type Yd)
Max Speed 200r.p.m.
Temperature -15℃---+55℃
Dimension 157mm×71mm×50mm
4—φ4mm, 61mm×52mm
Precision 0.04%
Using your counter
1. Set the wheels on the steel axle, tighten the screws on the wheel.
2. Install the counter on machine with 4—φ4mm.
3. Keep the wheels pressing on the surface of the object which you want to measure . Make sure the wheels will follow the object to move.
4. Press the Button to reset.
5. Start the machine. Measurement is beginning.
6. Stop the machine. Make sure the wheels stopped. Read the figures on the counter. That’s what you wanted.
